Avaya G430 Manual page 131

Valid Entry
IP
xxxVmpp
Analog Trunk
port
Survivable GK Node Name
Any valid previously-administered IP node name. Identifies the existence of other H.323
gatekeepers located within gateway products that offer survivable call features. For example,
the MultiTech MVPxxx-AV H.323 gateway family and the SLS function within the Branch
Gateways. When a valid IP node name is entered into this field, Communication Manager adds
the IP address of this gateway to the bottom of the Alternate Gatekeeper List for this IP network
region. As H.323 IP stations register with Communication Manager, this list is sent down in the
registration confirm message. With this, the IP station can use the IP address of this Survivable
Gatekeeper as the call controller of last resort.
If blank, there are no external gatekeeper nodes within a customer's network. This is the default
value.
Available only if the station type is an H.323 station for the 46xx or 96xx models.
Survivable COR
Sets a level of restriction for stations to be used with the survivable dial plan to limit certain
users to only to certain types of calls. You can list the restriction levels in order from the most
restrictive to least restrictive. Each level has the calling ability of the ones above it. This field
is used by PIM module of the Integrated Management to communicate with the Communication
Manager administration tables and obtain the class of service information. PIM module builds
a managed database to send for Standard Local Survivability (SLS) on the Branch
Gateways.
Available for all analog and IP station types.
Administering Avaya G430 Branch Gateway
Usage
dissociated. Use x for Administered WithOut Hardware (AWOH) and
Computer Telephony (CTI) stations, as well as for SBS Extensions.
Indicates that there is no hardware associated with the port assignment
since the switch was set up, and the administrator expects that the
extension would have an IP set. This is automatically entered for certain
IP station set types, but you can enter for a DCP set with softphone
permissions. This changes to the s00000 type when the set registers.
Specifies the Branch Gateway.
• xxx is the Branch Gateway number, which is in the range 001 to 250.
• m is the module number, which is in the range 1 to 9.
• pp is the port number, which is in the range 01 to 32.
Analog trunk port is available with:
• MM711 and MM714 media modules
• TN747 and TN797 circuit packs
Standard Local Survivability (SLS)
October 2013 131