Avaya G430 Manual page 580

Policy lists
• In ip qos-list context:
- show composite-operation. Displays a list of all composite operations
configured for the list
- show dscp-table. Displays the current list's DSCP table
- show ip-rule. Displays a list of all rules configured for the list
- show list. Displays the parameters of the current list, including its rules
• In ip qos-list/ip-rule context:
- show composite-operation. Displays the parameters of the composite
operation assigned to the current rule
- show dscp-table. Displays the current list's DSCP table
- show ip-rule. Displays the parameters of the current rule
• In ip qos-list/dscp-table context:
- show dscp-table. Displays the parameters of the current DSCP table entry
• In ip qos-list/composite-operation context:
- show composite-operation. Displays the parameters of the current composite
operation
Simulating packets
Procedure
Use the ip simulate command in the context of an interface to test a policy list.
The command tests the effect of the policy list on a simulated IP packet in the interface.
Specify the number of a policy list, the direction of the packet (in or out), and a source
and destination IP address. You may also specify other parameters. For a full list of
parameters, see Avaya Branch Gateway G430 CLI Reference.
Example
For example, the following command simulates the effect of applying QoS list number 401 to
a packet entering Branch Gateway through interface VLAN 2:
Gxxx-001(if:VLAN 2)# ip simulate 401 in CoS1 dscp46 10.1.1.1
10.2.2.2 tcp 1182 20
When you use the ip simulate command, the Branch Gateway displays the effect of the
policy rules on the simulated packet. For example:
Gxxx-001(super-if:VLAN 2)# ip simulate 401 in CoS1 dscp46 10.1.1.1
10.2.2.2 tcp 1182 20
Rule match for simulated packet is the default rule
580 Administering Avaya G430 Branch Gateway
Comments? infodev@avaya.com
October 2013