Avaya G430 Manual page 466

The router
RIPv2 and RIPv1 are considered the same protocol with regard to redistribution to and from
OSPF and static route preferences.
Summary of RIP commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level command
ip distribution
access-default-
action
ip distribution
access-list
ip distribution
access-list-cookie
ip distribution
access-list-copy
ip distribution
access-list-name
ip distribution
access-list-owner
interface (dialer|
fastethernet|
loopback|vlan|
tunnel)
466 Administering Avaya G430 Branch Gateway
Command
ip rip
authentication
key
no ip rip
authentication
key
ip rip
authentication
mode
Comments? infodev@avaya.com
Description
Set the default action for a specific
RIP distribution access list
Create a RIP distribution access list
Set the access list cookie
Copy the distribution access list
Set the name of the distribution list
Set the owner of the distribution list
Enter the Dialer, FastEthernet,
Loopback, Tunnel, or VLAN
interface context
Set the authentication string used
on the interface
Clear the password
Specify the type of authentication
used in RIP v2 packets
October 2013