Avaya G430 Manual page 563

Policy list attributes
Command
name
owner
cookie
show list
Default actions
When no rule matches a packet, the Branch Gateway applies the default action for the list.
The following table shows the default action for each type of policy list:
Access control list
QoS list
Deleting a policy list
Procedure
To delete a list, enter one of the following commands:
Administering Avaya G430 Branch Gateway
Defines a list name (text string). The default value is
owner.
Defines a list owner (text string). The default value is list#
<listnumber>.
Defines a list cookie (integer). The Avaya QoS Manager
uses the cookie attribute internally. Normally, you should
not change this attribute.
View the attributes.
List
Accept all packets
No change to the priority or DSCP
• To delete an access control list, enter no ip access-control-list followed
by the number of the list you want to delete.
• To delete a QoS list, enter no ip qos-list followed by the number of the list
you want to delete.
Description
Default action
Policy lists
October 2013 563