Avaya G430 Manual page 158

Standard Local Survivability (SLS)
Closure Close Code is administered, then Contact Closure Open Code must also be
administered.
This value must conform to the FACs or dial access codes defined by the dial plan.
Contact Closure Close Code
FAC used to close a contact closure relay. Contact closures control electrical devices remotely.
Users use an FAC to activate electrical devices such as electrical door locks. If Contact
Closure Open Code is administered, then Contact Closure Close Code must also be
administered.
This value must conform to the FACs or dial access codes defined by the dial plan.
Contact Closure Pulse Code
FAC used to pulse a contact closure relay.
This value must conform to the FACs or dial access codes defined by the dial plan.
Auto Route Selection (ARS) Access Code 1
FAC used to access ARS. The system can automatically choose the least-expensive way to
send a toll call. You can have one ARS access code for local and one for long distance, and
route accordingly.
This value must conform to the FACs or dial access codes defined by the dial plan.
Auto Route Selection (ARS) Access Code 2
Additional FAC used to access ARS.
This value must conform to the FACs or dial access codes defined by the dial plan.
ARS FAC
This is used instead of the Features screen ARS FAC entry if the Loc No. that correlates to
the gateway has an entry in this screen that overrides the general ARS FAC(s).
CAS Remote Hold/Answer Hold-Unhold Access Code
FAC used by a Centralized Attendant Service (CAS) attendant to place calls on hold and
answer calls held at a remote server running Communication Manager. This FAC can also be
used by an analog station. Flashing the switch-hook for the proper interval (between 200 and
1000 ms) while talking on an existing call causes the existing call to be placed on soft hold,
using which the analog user can dial the Answer Hold-Unhold FAC to Hard hold the call.
This value must conform to the FACs or dial access codes defined by the dial plan.
158 Administering Avaya G430 Branch Gateway
Comments? infodev@avaya.com
October 2013