Avaya G430 Manual page 40

Administering branch gateway
Hide thumbs Also See for G430:
Table of Contents

Advertisement

Accessing the Branch Gateway
Examples for displaying ASG authentication information
ASG authentication CLI commands
Enabling ASG authentication
About this task
ASG authentication can be enabled and disabled on the Branch Gateway and requires an ASG
authentication file. The ASG authentication file contains Avaya Services accounts for
authenticating users at login as members of Avaya Services. The Branch Gateway is shipped
with an ASG authentication file. For information about replacing the authentication file, refer
to
Replacing the ASG authentication file
Procedure
1. For connection to Avaya Services using a modem dial-up, enable the RASaccess
2. For connection to Avaya Services using embedded VPN service, set up the VPN
Replacing the ASG authentication file
Before you begin
If there is a need to install an authentication file with a different ID, first delete the current
authentication file using the command erase auth-file. This command requires
Supervisor level access and can be used only when directly connecting to the Services port.
If you do delete the authentication file and replace it with an authentication file with a new ID,
the authentication file label on the gateway chassis must also be replaced.
About this task
In case of any problems with the ASG authentication file, you can download a newer
authentication file from the Authentication File System (AFS). You cannot install an
authentication file with a different authentication file ID to that of the authentication file currently
installed in the gateway.
40
Administering Avaya G430 Branch Gateway
operation mode for modem operation using ppp authentication ras. The
Branch Gateway must also be configured for remote modem access and enabled,
as described in Installing and Upgrading the Avaya Branch Gateway G430.
service for Services to connect.
Note:
By default, Avaya Services login access is enabled. If Avaya Services login
access was blocked using no login authentication services-
logins, you can reactivate it using login authentication services-
logins.
Comments? infodev@avaya.com
on page 43
on page 43
on page 40.
October 2013

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents