Avaya G430 Manual page 147

Name
Outgoing Channel ID Encoding
Digit Handling (in/out)
Network (Japan) Needs Connect Before
Disconnect
Send Name
Send Calling Number
Incoming Calling Number - Format
Incoming Destination
Trunk Hunt
Sig Grp
Collecting DS1 trunks data
Procedure
1. At the SAT, enter display ds1 location to display the DS1 administration for
2. Gather the following DS1 information for each DS1 facility:
Administering Avaya G430 Branch Gateway
a particular circuit pack location.
• Name
• Bit-Rate
• Signaling Mode
• Channel Numbering
• Connect
• Interface
• Side
Standard Local Survivability (SLS)
Description
Used for encoding Channel ID IE
Defines overlap receiving and transmitting
rules
Sends a CONNECT message before
sending a DISCONNECT message, if
enabled
Specifies whether the Group Name is to be
specified with the message sent while
connecting to the network
Specifies whether the Trunk Group Number
is to be specified with the message sent while
connecting to the network
Specifies how to fill the Calling Party Number
and Called Party Number IEs
Sets a destination station for routing
incoming trunk group calls
Determines the method in which the
survivable-call-engine selects an available
trunk from the trunk group pool
Specifies the Signaling Group Number that
is the manager of this ISDN trunk member
October 2013 147