Contact closure
Configuring contact closure hardware
Procedure
Connect an Avaya Partner Contact Closure Adjunct
the Branch Gateway front panel, labeled CCA.
Use a telephone cable with standard RJ-11 connectors.
A qualified electrician should connect the electrical devices to the relays on the Avaya
Partner Contact Closure Adjunct
For information on contact closure specifications, see Overview for the Avaya Branch
Gateway G430.
Software contact closure
Contact closure modes
Mode
mgc
manual-trigger
manual-off
Configuring contact closure software
About this task
To configure the Branch Gateway to activate contact closure when the feature access code is
dialed:
Procedure
1. Enter the set contact-closure admin command.
318
Administering Avaya G430 Branch Gateway
™
.
The MGC controls contact closure. In mgc mode, the user dials
feature access codes to activate and deactivate contact closure.
Activates contact closure for the specified relay
Deactivates contact closure for the specified relay
Comments? infodev@avaya.com
™
to the Contact Closure port on
Description
October 2013