Avaya G430 Manual page 550

IPSec VPN
6. The remote peer (crypto isakmp peer) parameters
a. Remote peer
b. Pre-shared key
7. If the branch IP is dynamic
Summary of VPN commands
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level
command
clear crypto
isakmp
clear crypto
sa
clear crypto
sa counters
550 Administering Avaya G430 Branch Gateway
Parameter
First level
command
Comments? infodev@avaya.com
Possible values
• udp
• tcp
• dscp
• fragment
• icmp
• IP protocol
• IP address
• FQDN (dns name)
• 1 to 127 alphanumerical
characters. 1 to 64 bytes in
hexadecimal notation
• If the branch IP is an initiator, set
initiate mode to none (device is
a responder)
• If the branch IP is a responder,
set initiate mode to aggressive
(device is an initiator)
• Set self identity to identify the
device in the remote peer
Second level
command
Flush a specific ISAKMP SA or
all the ISAKMP SAs
Clear all or specific IPSec SAs
Clear the crypto SA counters
Actual value
Description
October 2013