Avaya G430 Manual page 396

Monitoring applications
Analyzing captured packets
Procedure
Analyze the captured packets by stopping the packet sniffing service, uploading the
capture file, and analyzing the capture file.
Related topics:
Stopping the packet sniffing service
Viewing packet sniffing information
Uploading the capture file
Capture file analysis
Stopping the packet sniffing service
Procedure
Enter capture stop to stop the packet sniffing service.
Stop the service in order to upload a capture file.
The capture stop command is not saved in the startup configuration file.
Viewing packet sniffing information
Procedure
1. You can enter show capture to view information about the packet sniffing
396 Administering Avaya G430 Branch Gateway
on page 397
on page 399
Note:
configuration and the capture state.
For example:
Gxxx-001> show capture
Capture service is enabled and inactive
Capture start time 19/06/2004-13:57:40
Capture stop time 19/06/2004-13:58:23
Current buffer size is 1024 KB
Buffer mode is cyclic
Maximum number of bytes captured from each frame: 1515
Capture list 527 on interface "FastEthernet 10/3"
Number of captured frames in file: 3596 (out of 3596 total captured frames)
Size of capture file: 266 KB (26.6 %)
Note:
The number of captured frames can be larger than the number of the frames in
the buffer because the capture file may be in cyclic mode.
Comments? infodev@avaya.com
on page 396
on page 396
October 2013