Avaya G430 Manual page 185

Administering branch gateway
Hide thumbs Also See for G430:
Table of Contents

Advertisement

Administering dial-pattern parameters
Procedure
1. Enter dial-pattern dialed-string, where dialed-string is a dial pattern
2. Enter set type dial-type, where dial-type specifies the type of outbound
3. Enter set max-length length to define the maximum length of the dialed
4. Enter set min-length length to define the minimum length of the dialed
5. Enter set tgnum tgnum to designate a trunk-group for which this dialed string is
6. Enter set deny no to permit stations to originate outgoing trunk calls.
7. At the command-line enter set insert-digits digits to define the digits to
8. Enter set delete-digits digits to define the number of digits to be deleted
9. Enter show to check the outbound dial-pattern string administration.
Administering Avaya G430 Branch Gateway
to be used on outgoing calls.
The command line prompt changes to super-sls/dial-pattern <dialed-
string>. If you want to remove the incoming routing treatment from the SLS
administration, enter exit to leave the second-level dial-pattern context and return
to the (super-sls)# context, and then enter clear dial-pattern dialed-
string.
call and the dialing privileges available for outbound calls.
For more information, see
Each level of call includes the previous level's dialing privileges. For example, locl
has the calling privileges of iop, intl, etc.
See
Inherited Class of Restriction (COR) permissions
of the relationship between the various dial types and the COR permissions.
string.
This must be set prior to the minimum length if the minimum length is larger than
the default value.
string.
assigned.
insert into a dialed string, if required.
from a dialed string, if required.
Note:
You can either insert or delete digits, but not both.
The report lists the dial-pattern parameters. For example:
Dialed-String/Deny
------------------
Available call types
Min/Max
Trunk
Length
Type
Group
------
----
-----
Standard Local Survivability (SLS)
on page 186.
on page 123 for an illustration
Delete/Insert
Digits
----------------------
October 2013
185

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents