Avaya G430 Manual page 157

3. Look up the location of the gateway, as follows:
Feature Access Code field descriptions
Related topics:
Contact Closure Open Code
Contact Closure Close Code
Contact Closure Pulse Code
Auto Route Selection (ARS) Access Code 1
Auto Route Selection (ARS) Access Code 2
ARS FAC
CAS Remote Hold/Answer Hold-Unhold Access Code
Contact Closure Open Code
FAC used to open a contact closure relay. Contact closures control electrical devices remotely.
Users use an FAC to activate electrical devices such as electrical door locks. If Contact
Administering Avaya G430 Branch Gateway
• If these fields are set to n (disabled), at the SAT, enter display feature-
access-codes and gather the following FAC information:
- Contact Closure Open Code
- Contact Closure Close Code
- Contact Closure Pulse Code
- Auto Route Selection (ARS) Access Code1
- Auto Route Selection (ARS) Access Code2
- ARS FAC
- CAS Remote Hold/ Answer Hold-Unhold Access Code
a. At the SAT, enter list media-gateway to get the gateway's number.
b. At the SAT, enter display media gateway number, where number is the
gateway number you obtained in Step
This provides you with the location field value.
• If the gateway has an administered location, at the SAT, enter display
locations number, where number is the administered location number.
If there is an ARS entry for the given location, you must use this value
exclusively in the SLS data set.
• If there is no administered location, at the SAT, enter display feature-
access-codes and gather the FAC information listed in Step
page 0 .
on page 157
on page 158
on page 158
on page 158
Standard Local Survivability (SLS)
a on page 0
on page 158
on page 158
on page 158
.
2 on
October 2013 157