Dynamic Trap Manager - Avaya G430 Manual

Command
set snmp
retries
set snmp
timeout
show snmp
show snmp
engineID
show snmp group
show snmp
retries
show snmp
timeout
show snmp user
show snmp
usertogroup
show snmp view
snmp-server
community
snmp-server
engineID
snmp-server
group
snmp-server
remote-user
snmp-server
user
snmp-server
view

Dynamic trap manager

Dynamic trap manager is a special feature that ensures that the Branch Gateway sends traps
directly to the currently active MGC. If the MGC fails, dynamic trap manager ensures that traps
are sent to the backup MGC.
Administering Avaya G430 Branch Gateway
Set the number of times to attempt to communicate with a particular
node
Specify the time to wait for a response before retrying the
communication
Display SNMP configuration information, including a list of SNMP
notification receivers
Display the SNMPv3 engine ID for the Branch Gateway
Display a list of SNMPv3 groups
Display the number of retry attempts to make when attempting to
communicate with a node
Display the time to wait before resending a communication
Display configuration information for a specified SNMP user
Display a table of SNMPv3 users and the groups to which they are
mapped
Display configuration information for all SNMP views
Enable or disable SNMP access to the Branch Gateway
Specify the SNMP Engine ID for the Branch Gateway
Define a new SNMPv3 group, or configure settings for the group
Configure settings for a remote SNMPv3 user. If the user does not
exist, it is created.
Configure settings for an SNMPv3 user. If the user does not exist,
it is created.
Configure settings for an SNMP MIB view. If the view does not exist,
it is created.
Description
SNMP
October 2013 313