Avaya G430 Manual page 165

11. Administer BRI links as required.
12. Administer the trunk groups.
13. Administer the signaling groups.
14. Administer ARS dial patterns for outgoing calls.
15. Administer digit treatment for incoming routed calls.
16. Optionally administer the attendant feature for the purpose of call routing by entering
17. Administer the Feature Access Codes (FACs) by entering set fac feature
Administering Avaya G430 Branch Gateway
Refer to Administering BRI parameters
Refer to Administering trunk-group parameters
members to the trunk group only after you administer the signaling group
information.
Refer to Administering signaling-group parameters
Refer to Administering dial-pattern parameters
Refer to Administering incoming-routing parameters
set attendant access-code extension, where access-code specifies the
dial access code for the attendant feature, and extension specifies the station
which serves as the branch office attendant position.
Incoming trunk calls that have dialed strings that cannot be completely routed, will
now be routed by SLS to this attendant position. In addition, stations in the branch
office may directly dial the attendant using the access-code.
fac, where feature is one of the following:
• ars1
• ars2
• hold
• contact-open
• contact-close
• contact-pulse
• fac
A 1 to 4 digit string that includes the digits 0 through 9, excluding * and # for
analog rotary phones. The fac string must be unique and must not conflict with
station extension numbers and Trunk Access Codes (TACs).
Examples
• set fac ars2 *9
• set fac contact-close 8
Standard Local Survivability (SLS)
on page 174.
on page 176. Note that you can add
on page 183.
on page 185.
on page 186.
October 2013 165