Mapping Cos Priorities To Internal Dscp Values - Huawei Quidway S1700 Series Web User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual
Figure 8-8 Configuring DSCP to DSCP Internal Mapping
----End
To show the DSCP to internal PHB map:
1. Click Traffic, Priority, DSCP to DSCP.
2. Select Show from the Action list.
Figure 8-9 Showing DSCP to DSCP Internal Mapping
Table 8-6 Parameters of DSCP to DSCP Internal Mapping
Title
DSCP
PHB
----End

8.3.5 Mapping CoS Priorities to Internal DSCP Values

Use the Traffic > Priority > CoS to DSCP page to map CoS/CFI values in incoming packets to
per-hop behavior for priority processing.
Issue 01 (2011-11-17)
Description
DSCP value in ingress packets. (Range: 0-63)
Per-hop behavior, or the priority used for this router hop.(Range: 0-7)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
8 Rate Limit Configuration
65