Edge-Core ECS4660-28F Management Manual page 782

| Unicast Routing
C 20
HAPTER
Configuring the Routing Information Protocol
C
ONFIGURING
N I
ETWORK NTERFACES
RIP
FOR
Click Apply.
4.
Figure 477: Setting the Distance Assigned to External Routes
To show the distance assigned to external routes learned from other
routing protocols:
Click Routing Protocol, RIP, Distance.
1.
Select Show from the Action list.
2.
Figure 478: Showing the Distance Assigned to External Routes
Use the Routing Protocol > RIP > Distance (Add) page to configure the
send/receive version, authentication settings, and the loopback prevention
method for each interface that participates in the RIP routing process.
CLI R
EFERENCES
"ip rip receive version" on page 1744
◆
◆ "ip rip send version" on page 1745
"ip rip authentication mode" on page 1742
◆
"ip rip authentication string" on page 1743
◆
"ip rip split-horizon" on page 1747
◆
C U
OMMAND SAGE
Specifying Receive and Send Protocol Types
◆ Specify the protocol message type accepted (that is, RIP version) and
the message type sent (that is, RIP version or compatibility mode) for
each RIP interface.
Setting the RIP Receive Version or Send Version for an interface
◆
overrides the global setting specified in the RIP General Settings screen
(see "Configuring General Protocol Settings" on page
– 782 –
771).