Port Mirroring Commands - Edge-Core AS6700-32X Cli Reference Manual

12
Local Port Mirroring Commands
port monitor

Port Mirroring Commands

Data can be mirrored from a local port on the same switch for analysis at the target
port using software monitoring tools or a hardware probe. This switch supports the
following mirroring modes.
Table 77: Port Mirroring Commands
Command Function
Local Port Mirroring Mirrors data to another port for analysis without affecting the data passing
through or the performance of the monitored port
RSPAN Mirroring Mirrors data from remote switches over a dedicated VLAN
This section describes how to mirror traffic from a source port to a target port.
Table 78: Mirror Port Commands
Command Function
port monitor Configures a mirror session
show port monitor Shows the configuration for a mirror port
This command configures a mirror session. Use the no form to clear a mirror
session.
Syntax
port monitor interface [rx | tx | both]
no port monitor interface
interface - ethernet unit/port (source port)
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
rx - Mirror received packets.
tx - Mirror transmitted packets.
both - Mirror both received and transmitted packets.
– 409 –
Mode
IC
PE