Table of Contents
Advertisement
| Multicast Routing
C
21
HAPTER
Configuring PIMv6 for IPv6
Expire – The time before the BSR is declared down.
◆
Role – Candidate or non-candidate BSR.
◆
State
– Operation state of BSR includes:
◆
16
No information – No information is stored for this device.
■
Accept Any – The router does not know of an active BSR, and will
■
accept the first bootstrap message it sees as giving the new BSR's
identity and the RP-set.
Accept Preferred – The router knows the identity of the current
■
BSR, and is using the RP-set provided by that BSR. Only bootstrap
messages from that BSR or from a C-BSR with higher weight than
the current BSR will be accepted.
Candidate BSR – Bidding in election process.
■
Pending-BSR – The router is a candidate to be the BSR for the RP-
■
set. Currently, no other router is the preferred BSR, but this router
is not yet the elected BSR.
Elected BSR – Elected to serve as BSR.
■
W
I
EB
NTERFACE
To display information about the BSR:
Click Routing Protocol, PIM6, PIM6-SM.
1.
Select Show Information from the Step list.
2.
Select Show BSR Router from the Action list.
3.
Figure 546: Showing Information About the PIM6 BSR
16. These parameters are based on RFC 5059.
– 864 –
Advertisement
Chapters
Table of Contents
