Table 53: Ospf System Information - Edge-Core ECS4660-28F Management Manual

| Unicast Routing
C 20
HAPTER
Configuring the Open Shortest Path First Protocol (Version 2)
D
ISPLAYING
A
DMINISTRATIVE
S
ETTINGS AND
S
TATISTICS
Figure 490: Configure General Settings for OSPF
Use the Routing Protocol > OSPF > System (Show) page to display general
administrative settings and statistics for OSPF.
CLI R
EFERENCES
"show ip ospf" on page 1777
◆
"show ip protocols ospf" on page 1790
◆
P
ARAMETERS
These parameters are displayed:

Table 53: OSPF System Information

Parameter Description
Router ID Type Indicates if the router ID was manually configured or
automatically generated by the system.
Rx LSAs The number of link-state advertisements that have been received.
Originate LSAs The number of new link-state advertisements that have been
originated.
AS LSA Count The number of autonomous system LSAs in the link-state
database.
External LSA Count The number of external link-state advertisements in the link-state
database.
External LSA Checksum Checksum of the external link-state advertisement database.
Admin Status Indicates if there are one or more configured OSPF areas with an
active interface (that is, a Layer 3 interface that is enabled and
up).
– 796 –