| General IP Routing
C
18
HAPTER
Configuring IP Routing Interfaces
U
T
SING THE
RACE
R
F
OUTE
UNCTION
the % delimiter. For example, FE80::7272%1 identifies VLAN 1 as the
interface.
W
I
EB
NTERFACE
To ping another device on the network:
Click IP, General, Ping.
1.
Specify the target device and ping parameters.
2.
Click Apply.
3.
Figure 443: Pinging a Network Device
Use the IP > General > Trace Route page to show the route packets take to
the specified destination.
CLI R
EFERENCES
"traceroute" on page 1653
◆
P
ARAMETERS
These parameters are displayed:
Destination IP Address – IPv4/IPv6 address of the host.
◆
IPv4 Max Failures – The maximum number of failures before which
◆
the trace route is terminated. (Fixed: 5)
IPv6 Max Failures – The maximum number of failures before which
◆
the trace route is terminated. (Range: 1-255; Default: 5)
C
U
OMMAND
SAGE
Use the trace route function to determine the path taken to reach a
◆
specified destination.
– 746 –