Edge-Core ECS4660-28F Management Manual page 863

Figure 544: Configuring a PIM6 RP Candidate
To display settings for an RP candidate:
1.
2.
3.
4.
Figure 545: Showing Settings for a PIM6 RP Candidate
Use the Routing Protocol > PIM6 > SM (Show Information – Show BSR
D
ISPLAYING THE
Router) page to display Information about the bootstrap router (BSR).
PIM6 BSR R
OUTER
CLI R
◆
P
These parameters are displayed:
◆
◆
◆
◆
Click Routing Protocol, PIM6, PIM6-SM.
Select RP Candidate from the Step list.
Select Show from the Action list.
Select an interface from the VLAN list.
EFERENCES
"show ipv6 pim bsr-router" on page 1970
ARAMETERS
IP Address – IP address of interface configured as the BSR.
Uptime – The time this BSR has been up and running.
Priority – Priority value used by this BSR candidate.
Hash Mask Length – The number of significant bits used in the
multicast group comparison mask by this BSR candidate.
– 863 –
| Multicast Routing
C 21
HAPTER
Configuring PIMv6 for IPv6