Edge-Core ECS4660-28F Management Manual page 765

Figure 461: Setting the Virtual Router Address for a VRRP Group
To show the virtual IP address assigned to a VRRP group:
Click IP, VRRP.
1.
Select Configure Group ID from the Step List.
2.
Select Show IP Addresses from the Action List.
3.
Select a VLAN, and a VRRP group identifier.
4.
Figure 462: Showing the Virtual Addresses Assigned to VRRP Groups
To configure detailed settings for a VRRP group:
Click IP, VRRP.
1.
Select Configure Group ID from the Step List.
2.
Select Configure Detail from the Action List.
3.
Select a VRRP group identifier, and set any of the VRRP protocol
4.
parameters as required.
Click Apply.
5.
– 765 –
| Configuring Router Redundancy
C 19
HAPTER
Configuring VRRP Groups