Configuring the Open Shortest Path First Protocol (Version 2)
One of the ABRs must be next to the isolated area and the transit area
at one end of the link, while the other ABR must be next to the transit
area and backbone at the other end of the link.
W
I
EB
NTERFACE
To create a virtual link:
Click Routing Protocol, OSPF, Virtual Link.
1.
Select Add from the Action list.
2.
Specify the process ID, the Area ID, and Neighbor router ID.
3.
Click Apply.
4.
Figure 512: Adding a Virtual Link
To show virtual links:
Click Routing Protocol, OSPF, Virtual Link.
1.
Select Show from the Action list.
2.
Select the process ID.
3.
Figure 513: Showing Virtual Links
To configure detailed settings for a virtual link:
Click Routing Protocol, OSPF, Virtual Link.
1.
Select Configure Detailed Settings from the Action list.
2.
– 819 –
| Unicast Routing
C
20
HAPTER