Table 52: Vrrp Group Statistics - Edge-Core ECS4660-28F Management Manual

D VRRP G
ISPLAYING
Figure 464: Showing Counters for Errors Found in VRRP Packets
S
ROUP TATISTICS
Use the IP > VRRP (Show Statistics – Group Statistics) page to display
counters for VRRP protocol events and errors that have occurred on a
specific VRRP interface.
CLI R
EFERENCES
"show vrrp interface counters" on page 1721
◆
P
ARAMETERS
These parameters are displayed:
◆ VLAN ID – VLAN configured with an IP interface. (Range: 1-4094)
VRID – VRRP group identifier. (Range: 1-255)
◆
The following statistics are displayed:

Table 52: VRRP Group Statistics

Parameter Description
Times Transitioned to Number of times this router has transitioned to master.
Master
Received Advertisement Number of VRRP advertisements received by this router.
Packets
Received Error Number of VRRP advertisements received for which the
Advertisement Interval advertisement interval is different from the one configured for the
Packets local virtual router.
Received Authentication Number of VRRP packets received that do not pass the
Failure Packets authentication check.
Received Error IP TTL Number of VRRP packets received by the virtual router with IP TTL
VRRP Packets (Time-To-Live) not equal to 255.
Received Priority 0 VRRP Number of VRRP packets received by the virtual router with
Packets priority set to 0.
Sent Priority 0 VRRP Number of VRRP packets sent by the virtual router with priority
Packets set to 0. A priority value of zero indicates that the group master
has stopped participating in VRRP, and is used to quickly transition
a backup unit to master mode without having to wait for the
master to time out.
– 767 –
| Configuring Router Redundancy
C 19
HAPTER
Displaying VRRP Group Statistics