Edge-Core ECS4660-28F Management Manual page 787

D P
ISPLAYING EER
R I
OUTER NFORMATION
Figure 481: Showing RIP Interface Settings
Use the Routing Protocol > RIP > Statistics (Show Peer Information) page
to display information on neighboring RIP routers.
CLI R
EFERENCES
"show ip protocols rip" on page 1748
◆
P
ARAMETERS
These parameters are displayed:
◆ Peer Address – IP address of a neighboring RIP router.
Update Time – Last time a route update was received from this peer.
◆
Version – Shows whether RIPv1 or RIPv2 packets were received from
◆
this peer.
Rcv Bad Packets – Number of bad RIP packets received from this
◆
peer.
Rcv Bad Routes – Number of bad routes received from this peer.
◆
W I
EB NTERFACE
To display information on neighboring RIP routers:
Click Routing Protocol, RIP, Statistics.
1.
Select Show Peer Information from the Action list.
2.
Figure 482: Showing RIP Peer Information
– 787 –
C 20
HAPTER
Configuring the Routing Information Protocol
| Unicast Routing