Table of Contents
Advertisement
| Unicast Routing
C
20
HAPTER
Configuring the Open Shortest Path First Protocol (Version 2)
To configure interface settings for a specific area assigned to a VLAN:
Click Routing Protocol, OSPF, Interface.
1.
Select Configure by Address from the Action list.
2.
Specify the VLAN ID, enter the address assigned to an area, and
3.
configure the required interface settings.
Click Apply.
4.
Figure 508: Configuring Settings for a Specific Area Assigned to a VLAN
– 816 –
Advertisement
Chapters
Table of Contents
