Automatic Transmission Fluid Replacement; Automatic Transmission Fluid Cooler Hose Inspection; Air Conditioning Filter (If Equipped) Inspection; Air Conditioning Filter (If Equipped) Replacement - Suzuki Ignis Service Manual

Automatic Transmission Fluid Replacement

1) Inspect transmission case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level check.
3) Change fluid. For its procedure, refer to "Fluid change" in
Section 7B.
1. Drain plug
Automatic Transmission Fluid Cooler Hose
Inspection
Check automatic transaxle fluid cooler hose for fluid leakage,
cracks, damage and deterioration.
Replace hose and/or clamp if any faulty condition is found.
Air Conditioning Filter (If Equipped) Inspec-
tion
1) Remove the air conditioning filter from the cooling unit refer-
ring to "Air Conditioning Filter (If Equipped) Replacement" in
this section.
2) Check for dirt and dust. If the air conditioning filter is exces-
sively dirty, replace the air conditioning filter with the new
one. If not, go to the next step.
3) Blow compressed air on the air outlet side of the air condi-
tioning filter for removing dust.
4) Install the air conditioning filter into the cooling unit by
reversing the removal procedure.
Air Conditioning Filter (If Equipped) Replace-
ment
1) Remove the air conditioning filter door (1) from the cooling
unit (2).
2) Remove the air conditioning filter from the cooling unit.
3) Install the new air conditioning filter into the cooling unit.
4) Install the air conditioning filter door onto the cooling unit.
2
1
MAINTENANCE AND LUBRICATION 0B-13