Table of Contents
Advertisement
7D-12 TRANSFER
TRANSFER OUTPUT RETAINER
ADJUSTMENT
"a": Pinion dummy (special tool) height
"b": Height from retainer installation face to pinion dummy
"c": Distance from retainer installation face to end face of bearing race ("b" – "a")
"d": Distance from end face of left case to cylinder section of reduction driven gear
"e": Outer diameter of cylinder section of reduction driven gear (29.7 mm/1.1693 in.)
"f": Distance from end face of left case to center shaft of reduction driven gear ("d" + "e"/2)
"g": Dimension marked on bevel pinion shaft (Marked in shaft in mm)
"h": Shim size for mounting distance adjustment ("g" + "c" – "f")
Special tool
(A) : 09922-76140
(B) : 09922-76150
(C) : 09922-76340
(D) : 09922-76430
1. Transfer output retainer
2. Left case
3. Pinion shaft bearing
4. Reduction driven gear
5. Bevel pinion shaft
Advertisement
Table of Contents
