Suzuki Ignis Service Manual page 994

Fig. 1 for Step 1
Fig. 2 for Step 2
DTC11/32 TRANSPONDER CODE NOT MATCHED
DESCRIPTION
Immobilizer Control Module checks if Transponder code transmitted from ignition key and that registered in
Immobilizer Control Module match when ignition switch is ON. If they do not, DTC 11 and/or 32 are set.
INSPECTION
Register ignition key with built-in transponder by using SUZUKI scan tool and performing following steps.
1) Register Transponder code in Immobilizer Control Module by performing procedure described in "How To
Register Ignition Key".
2) Turn ignition switch OFF, then turn it ON and check that DTC11 and/or 32 are not set.
IMMOBILIZER CONTROL SYSTEM 8G-13