On-Vehicle Service - Suzuki Ignis Service Manual

4A-2 FRONT DRIVE SHAFT
Front Drive Shaft Assembly Construction
[A] : M15 engine model
[B] : Z13DT engine model
1. Transaxle
2. Drive shaft assembly
3. Tie-rod end
4. Suspension control arm
5. Stabilizer
6. Stabilizer mount bracket bolt

On-Vehicle Service

7. Oil drain plug
: Apply sealant 99000-31260 to plug thread.
8. Oil filler/level plug
: Apply sealant 99000-31260 to plug thread.
8-1. Oil filler/level plug
: Apply sealant 99000-31260 to plug thread.
: Tighten the plug 4 N·m (0.4 kg-m), 45° and
135°.
9. Tie-rod end nut
10. Ball stud bolt
11. Drive shaft nut
12. Wheel bolt
13. Drive shaft washer
14. Center bearing support
15. Center shaft
16. Center bearing support bolts
17. Oil pan
18. Oil pan bolt
Do not reuse.
Tightening torque