Table of Contents
Advertisement
8G3-6 IMMOBILIZER CONTROL SYSTEM (Z13DT ENGINE MODEL)
1
With the ignition switch at ON (but the engine at stop) regardless
of the condition of the engine and emission control system, ECM
indicates whether some trouble has occurred in the immobilizer
control system or not by turning ON or flashing ON and OFF the
SVS lamp (1).
SVS lamp is ON, and then OFF after 3 seconds:
No trouble exists in the immobilizer control system.
SVS lamp flashes ON and OFF at 0.25-sec. intervals:
ECM or Immobilizer Control Module has detected some
trouble in the immobilizer control system.
NOTE:
As soon as the ignition switch is turned to ON position,
ECM and Immobilizer Control Module diagnose if a trou-
ble has occurred in the immobilizer control system in
about 3 seconds at maximum.
While the diagnosis is being made, the SVS lamp stays
on and diagnosis result is abnormal, it immediately starts
flashing but if the result is normal, it remains on.
Advertisement
Table of Contents
