Table of Contents
Advertisement
9-20 BODY SERVICE
1, (a)
1, (a)
1, (a)
4) Support door panel (1) using a jack (2) with a piece of wood
placed (4) between jack (2) and panel (1) as shown.
3. Rags
5) Remove door assembly (1) by loosening hinge mounting
bolts (2).
INSTALLATION
Reverse removal procedure to install door assembly noting the
following instructions.
• When replacing door, coat replacement door inside with wax
for proper anti-corrosion treatment.
Refer to "ANTI-CORROSION COMPOUND APPLICATION
AREA" in this section.
• Apply sealant to contact face "A" of hinge (1) and apply
grease to rotating part "B" of hinge (1).
"A" : Sealant 99000-31110
"B" : Lithium grease 99000-25010
• Tighten hinge bolt (1) to specified torque.
Tightening torque
Door hinge mounting bolt
(a) : 23 N·m (2.3 kg-m, 17.0 lb-ft)
Advertisement
Table of Contents
