Front Clutch (C2 Clutch) - Suzuki Ignis Service Manual

FRONT CLUTCH (C2 CLUTCH)

1. Front clutch No.1 drum
2. D-ring
: Apply grease 99000-25030 to all over surface.
3. Front clutch piston
: Apply grease 99000-25030 to the lip of the piston.
4. Front clutch return spring seat
5. Front clutch balancer
6. Shaft snap ring
7. Clutch plate
8. Clutch disc
9. Clutch flange
10. Snap ring
Apply automatic transmission fluid.
Do not reuse.
DISASSEMBLY
1) Remove snap ring.
2) Remove flange (1), discs and plates.
3) Remove shaft snap ring (1).
Compress piston return springs and remove shaft snap ring.
Place special tool (clutch spring compressor) on spring seat
and compress spring with a press (2), and then remove shaft
snap ring, using a flat end rod or the like (3).
CAUTION:
Do not push down return spring more than necessary.
Special tool
(A) : 09926-96010
AUTOMATIC TRANSMISSION (4 A/T) 7B-91