Table of Contents
Advertisement
9-26 BODY SERVICE
FRONT FENDER
2
1. Front fender lining
INSPECTION
Check that hood opens and closes smoothly and properly. Lubri-
cate if necessary. Also check that secondary latch operates prop-
erly (check that secondary latch keeps hood from opening all the
way) and hood locks securely when closed.
Adjust hood locks position if necessary.
3
"A"
2. Front fender
REMOVAL
1) Remove front fender side moulding.
2) Remove front bumper.
3) Disconnect connector of side turn signal (or side marker)
4) Remove front fender lining.
5) Remove front fender.
INSTALLATION
Reverse removal procedure to install front fender noting the fol-
lowing instructions.
• If paint on fender bolt is peeled off, be sure to apply paint
• Adjust panel clearance referring to "PANEL CLEARANCE" in
"A"
1
3. Front fender side moulding
lamp.
again.
this section.
"A"
Advertisement
Table of Contents
