Table of Contents
Advertisement
1
2
2) Install parking brake cable clamp (1) to trailing arm (2).
3) Clamp wheel speed sensor lead wire clamps (1) and (2)
2
securely (if equipped with ABS).
4) Install shock absorber (1) lower side to rear axle (or axle
housing).
Tighten shock absorber lower bolt (2) temporarily by hand at
this step.
5) Remove floor jack from rear axle (or axle housing).
6) Install wheel and tighten wheel bolts to specified torque.
Tightening torque
Wheel bolt: 95 N·m (9.5 kg-m, 69.0 lb-ft)
7) Lower hoist.
REAR SUSPENSION 3E-7
Advertisement
Table of Contents
