B
A
1
1
2
5) Assemble 5th speed synchronizer sleeve (1), hub (2), 5th
speed synchronizer levers (3) and synchronizer ring (4) as
follows.
a) Install hub (1) to 5th speed synchronizer sleeves (2) in
specified direction as shown in figure.
1
A : Chamfered side
B : Long boss
2
b) Fit 5th speed synchronizer levers (1) to hub (2) as shown in
figure.
NOTE:
A
• Aligne protrusion "A" of 5th speed synchronizer levers
2
(1) with groove of hub (2).
c) Install synchronizer ring (1) to hub (2) as shown in figure.
MANUAL TRANSAXLE (M15 ENGINE MODEL) 7A2-23