Table of Contents
Advertisement
3
3
1
2
2
1
Identification Information
• Always be careful not to handle electrical parts (com-
puter, relay, etc.) in a rough manner or drop them.
Precaution for CAN Communication System
• The loose (1) in the wire harnesses twist of the CAN lines
except around the connector (3) should be within 100 mm
(3.9 in.) Refer to the wiring diagram for the CAN line discrim-
ination. Excessive loosed lines may be influenced by the
electric noise.
2. Controller
• Do not connect terminals of the CAN line using a bypass
wire (1). Otherwise, the CAN line may be influenced by the
electric noise.
Vehicle Identification Number
The number is punched on front dash panel in engine room and it
is also on the left side of instrument panel depending on the vehi-
cle specification.
GENERAL INFORMATION 0A-5
Advertisement
Table of Contents
