Table of Contents
Advertisement
DTC B3055 No Transponder
DTC Detecting Condition and Trouble Area
DTC Detecting Condition
• No FIX CODE (FC) is transmitted from transponder.
• FC transmission error.
Troubleshooting
Step
1
1) Ignition switch at OFF position and leave it
for 5 seconds or more.
2) Pull out ignition key and reinsert it.
3) Turn ignition switch to run engine.
Does engine start?
2
1) Check ignition key for shape by referring to
the figure below.
Is it the original one?
[A]
Action
[A]: Fig. for Step 2
IMMOBILIZER CONTROL SYSTEM (Z13DT ENGINE MODEL) 8G3-17
Trouble Area
Ignition key
Yes
Temporal error in code
reading.
Immobilizer control sys-
tem is in good condition.
Check ignition key refer-
ring to "Precautions in
Handling Immobilizer
Control System" in this
section and repair or
replace.
No
Go to Step 2.
Ignition key with built-in
transponder unusable.
Replace, register it if nec-
essary and recheck.
Advertisement
Table of Contents
