Table of Contents
Advertisement
DISABLING AIR BAG SYSTEM
1) Turn steering wheel so that vehicle's wheels (front tires) and
pointing straight ahead.
2) Turn ignition switch to "LOCK" position and remove key.
3) Remove "AIR BAG" fuse (2) from fuse box (1).
4) Disconnect Yellow connector (3) of contact coil and combi-
nation switch assembly.
a) Release locking of lock lever.
b) After unlocked, disconnect connector.
5) If equipped with passenger air bag (inflator) module, pull out
glove box while pushing its stopper from both right and left
sides and disconnect Yellow connector (4) of passenger air
bag (inflator) module.
a) Release locking of lock lever.
b) After unlocked, disconnect connector.
NOTE:
With "AIR BAG" fuse removed and ignition switch ON,
"AIR BAG" warning lamp will be ON.
This is normal operation and does not indicate a air bag
system malfunction.
ENABLING AIR BAG SYSTEM
1) Turn ignition switch to "LOCK" position and remove key.
2) Connect Yellow connector (1) of contact coil and combina-
tion switch assembly, and be sure to lock connector with lock
lever.
a) Connect connector.
b) Lock connector with lock lever.
AIR BAG SYSTEM 10B-47
Advertisement
Table of Contents
