Table of Contents
Advertisement
0B-8 MAINTENANCE AND LUBRICATION
1) Remove oil filter element.
a) Place oil collecting basin under filter.
b) Loosen and remove oil filter housing cover (1).
1
c) Pull out oil filter element (2) from cover.
2
2) Drain engine oil by removing drain plug (1).
3) After draining oil, wipe drain plug clean and replace seal ring
with a new one. Reinstall drain plug, and tighten it securely
as specified below.
Tightening torque
Engine oil drain plug (a): 20 N·m (2.0 kg-m, 14.5 lb-ft)
1
4) Install oil filter element.
a) Replace seal ring (1) of oil filter housing cover (3) with new
2
b) Install new oil filter element (2) to cover.
1
3
c) Install oil filter housing cover with element.
Tightening torque
Oil filter housing cover (a): 25 N·m (2.5 kg-m) 18.5 lb-ft
(a)
one and apply engine oil to seal ring.
Advertisement
Table of Contents
