Automatic Transaxle Fluid Level Inspection; Automatic Transaxle Fluid Replacement; Automatic Transaxle Fluid Cooler Hose; Inspection - Suzuki Swift Sport 2004 Service & Repair Manual

Automatic Transaxle Fluid Level Inspection

1) Inspect transaxle case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level
check.
3) Check fluid level under specified conditions referring
to "A/T Fluid Level Check in Section 5A".
If fluid level is low, replenish specified fluid.
1. Dipstick
2. Clamp

Automatic Transaxle Fluid Replacement

1) Inspect transaxle case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level
check.
3) Change fluid. For its procedure, refer to "A/T Fluid
Change in Section 5A".
1. Drain plug
S7RS0B0206028
I4RS0A020016-01
3. FULL HOT mark
4. LOW HOT mark
S7RS0B0206029
I4RS0A020017-01
Maintenance and Lubrication:

Automatic Transaxle Fluid Cooler Hose

Inspection

Check automatic transaxle fluid cooler hose for fluid
leakage, cracks, damage and deterioration.
Replace hose and/or clamp if any faulty condition is
found.

All Latches, Hinges and Locks Inspection

Doors
Check that each door of front, rear and back doors
opens and closes smoothly and locks securely when
closed.
If any malfunction is found, lubricate hinge and latch or
repair door lock system.
Engine Hood
Check that secondary latch operates properly (check
that secondary latch keeps hood from opening all the
way even when pulling hood release handle inside
vehicle.) Also check that hood opens and closes
smoothly and properly and hood locks securely when
closed.
If any malfunction is found, lubricate hinge and latch, or
repair hood lock system.
0B-11
S7RS0B0206030
I4RS0A020020-01
S7RS0B0206031
I2RH01020033-01