7C-4 CLUTCH
CLUTCH CABLE
1. Clutch cable
2. Release lever
3. Joint pin
: Apply grease 99000-25010 to joint pin.
4. Joint nut
5. Clutch pedal
ON-VEHICLE SERVICE
6. Pedal bracket
7. Adjusting bolt
8. Lock nut
9. Clutch cable hook
: Apply grease 99000-25010 to cable hook.
Tightening torque
REMOVAL
1) Disconnect negative cable at battery.
2) Remove clutch cable joint nut (1).
3) Remove joint pin (2) from clutch release lever (3).
4) Disconnect cable hook (1) from clutch pedal (4).
5) Remove clutch cable (3) from bracket (5) by turning cable
cap (2) about 90° as shown.