Suzuki Ignis Service Manual page 1046

2
1
2
10) Remove instrument panel mounting bolts (2).
2
11) Remove instrument panel (1) with steering support member
2
2
INSTALLATION
Reverse removal procedure to install instrument panel noting the
following instructions.
• When installing each part, be careful not to catch any cable
• Tighten instrument panel mounting bolts (1) to specified
1, (a)
Tightening torque
Instrument panel mounting bolts (a) :
23 N·m (2.3 kg-m, 17.0 lb-ft)
• When installing steering column assembly, refer to "STEER-
1, (a)
• Adjust control cables. Refer to "HEATER CONTROL
• Enable air bag system if equipped. Refer to "ENABLING AIR
and instrument panel harness.
or wiring harness.
torque
ING COLUMN ASSEMBLY" in Section 3C.
ASSEMBLY" in Section 1A.
BAG SYSTEM" in Section 10B.
BODY SERVICE 9-39