Suzuki Ignis Service Manual page 1374

MANUAL TRANSAXLE (M15 ENGINE MODEL) 7A2-19
Installation
1) Apply grease to select lever shaft bush and select lever
boss, and install gear shift and select shaft assembly with
new gasket into transaxle.
"A" : Grease 99000-25010
2) Apply sealant to gear shift guide case bolts (1). Tighten gear
shift guide case bolts (1) to specified torque at the position
that clearance "a" is within 1 - 1.5 mm (0.04 - 0.06 in.).
"B" : Sealant 99000-31260
Tightening torque
Gear shift guide case bolt
(a) : 23 N·m (2.3 kg-m, 17.0 lb-ft)
3) Install washer and gear shift interlock bolt (2) to which seal-
ant have been applied and them tighten it to specified
torque.
"B" : Sealant 99000-31260
Tightening torque
Gear shift interlock bolt (b) : 50 N·m (5.0 kg-m, 37.5 lb-ft)
4) Install washer and 5th to reverse interlock guide bolt (3) to
which sealant have been applied and then tighten it to speci-
fied torque.
"B" : Sealant 99000-31260
Tightening torque
5th to reverse interlock guide bolt
(c) : 23 N·m (2.3 kg-m, 17.0 lb-ft)