Suzuki Ignis Service Manual page 1056

2
1
3
3
1
1
3
INSTALLATION
Reverse removal procedure to install head lining noting the follow-
ing instructions.
• Apply double-face tape (1) to head lining (2) as shown figure,
and then install head lining (2).
• Tighten assistant grip screw (3) to specified torque.
Tightening torque
Assistant grip screw : 4 N·m (0.4 kg-m, 2.8 lb-ft)
• Tighten sun visor screw (1) to specified torque.
Tightening torque
Sun visor screw (a) : 4 N·m (0.4 kg-m, 2.8 lb-ft)
BODY SERVICE 9-49