Table of Contents
Advertisement
7B-154 AUTOMATIC TRANSAXLE
8) Remove forward clutch piston O-ring (1) from intermediate
shaft subassembly (2).
9) Remove forward clutch drum O-ring (1) from forward clutch
drum (2).
10) Remove intermediate shaft seal ring (1) from intermediate
shaft subassembly (2).
Inspection
Clutch Discs, Separator Plates and Retaining Plate
Check that sliding surfaces of discs, separator plates and retain-
ing plate are not worn hard or burnt. If necessary, replace.
NOTE:
• If disc lining is exfoliated or discolored, replace all
discs.
• Before assembling new discs, soak them in A/T fluid
for at least two hours.
Advertisement
Table of Contents
