Table of Contents
Advertisement
7B-164 AUTOMATIC TRANSAXLE
Differential Assembly
1. Differential side RH bearing
2. Output shaft speed sensor (VSS) drive gear
3. Differential case subassembly
4. Final gear
5. Side bearing shim
6. Final gear bolt
• Do not damage O/D and 2nd coast brake return spring sub-
assembly and piston by pressing in O/D and 2nd coast brake
return spring subassembly passing through its original
installing position over 1.0 mm (0.039 in.).
Special tool
(A): 09926-96030
(B): 09946-06710
1. Transaxle rear cover
7. Side bearing cup
8. Differential side LH bearing
Apply automatic transaxle fluid.
Tightening torque
Do not reuse.
Advertisement
Table of Contents
