Table of Contents
Advertisement
7B-130 AUTOMATIC TRANSMISSION (4 A/T)
49) Install differential gear assembly (1).
NOTE:
Grease can be applied around the R and L bearing of dif-
ferential gear assembly to ease fitting to the transmis-
sion case and torque converter housing.
50) Install thrust bearing race (1) and thrust needle roller bearing
(2) to the top of counter driven gear (3).
51) Apply grease to oil pump D-ring.
Install new gasket to transmission case and install torque
converter housing (1).
Tightening torque
Torque converter housing bolts
(h) : 19 N·m (1.9 kg-m, 14.0 lb-ft)
Grease 99000-25030
NOTE:
Apply thread lock to the three bolts shown in figure.
"A" : Thread lock cement 99000-32110
2. New bolt
Advertisement
Table of Contents
