Back Door Glass - Suzuki Ignis Service Manual

9-18 BODY SERVICE

BACK DOOR GLASS

1. Back door glass 2. Fastener
"A"
"A"
2 1
"A"
"c"
"a"
"b"
"A"
"d"
2
3
1
REMOVAL AND INSTALLATION
Refer to "WINDSHIELD" in this section as removal and installa-
tion procedures are basically the same. However, note the follow-
ing.
• Observe the following precautions when applying adhesive
(1) along glass (2) edge.
• Adhesive (1) should be applied evenly especially in height.
• Be careful not to damage primer (3).
• Press glass against body quickly after adhesive (1) is
applied.
Adhesive amount specifications and position for back
door glass
Height "a" : 13 mm (0.51 in.)
Width "b" : 6 mm (0.24 in.)
Width "c" : 14 mm (0.55 in.)
Position "d" : 14.5 mm (0.57 in.) for glass upper section
Position "d" : 16 mm (0.63 in.) for glass bottom section
Position "d" : 32 mm (1.26 in.) for glass side sections