Table of Contents
Advertisement
2,(a)
27) Disconnect transaxle from engine referring to "Transaxle
Unit Dismounting and Remounting" in Section 7A2(for M/T
vehicle).
28) Disconnect automatic transaxle from engine referring to
"Automatic Transaxle Assembly" in Section 7B (for A/T vehi-
cle).
29) Remove clutch cover and clutch disk referring to "Clutch
Cover, Clutch Disc and Flywheel Removal and Installation"
in Section 7C1 (for M/T vehicle).
Installation
1) Install clutch cover and clutch disk referring to "Clutch Cover,
Clutch Disc and Flywheel Removal and Installation" in Sec-
tion 7C1 (for M/T vehicle).
2) Connect transaxle to engine referring to "Transaxle Unit Dis-
mounting and Remounting" in Section 7A2 (for M/T vehicle).
3) Connect automatic transaxle to engine referring to "Auto-
matic Transaxle Assembly" in Section 7B (for A/T vehicle).
4) Lift engine with transaxle into engine compartment, but do
not remove lifting device.
5) Install engine rear mounting bolts (1), engine left mounting
bracket nuts (2) and engine right mounting nuts (3).
Tighten these bolts and nuts to specified torque.
Tightening torque
1,(a)
Engine left mounting bolts
(a) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
Engine right mounting bracket nuts
(b) : 65 N·m (6.5 kg-m, 47.0 lb-ft)
6) Remove lifting device.
3,(b)
ENGINE MECHANICAL (M15 ENGINE) 6A1-7
Advertisement
Table of Contents
